Rear panel

Parent chapter  Previous page  Next page

 

 

Titan's rear panel contains all Titan's connections, except for the instrument inputs and headphone output, which are on the front panel.

 

From left to right (viewed from rear):

 

6A IEC inlet (regional power cord supplied): adjacent is the mains fuse holder.

 

RJ45 100Mbps Ethernet port: reserved for future use.

 

USB 2.0 device port for connection to host computer (cable supplied).

 

Wordclock output and input BNC sockets: the Wordclock output can supply base-clock or 256x clock if required.  See the Synchronization section.

 

MDIO module slot: allows connection to a non-USB host via an optional MDIO (multi-channel IO) expansion module, as described in the MDIO expansion slot section.

 

TOSLINK output and input: can be used for S/PDIF (up to 192kHz sample rate) or ADAT (44.1kHz/48kHz, or 88.2kHz/96kHz in SMUX mode).  See Digital inputs and Digital outputs.

 

S/PDIF output and input RCA sockets: these can also be operated as AES3 interfaces (RCA-XLR and XLR-RCA adapter cables supplied).  See Digital inputs and Digital outputs.

 

Line output TRS jacks 1-8: switchable +4dBu/-10dBV level, can operate in balanced or unbalanced mode. See Analogue outputs.

 

Line input TRS jacks 5-8: switchable +4dBu/-10dBV level, can operate in balanced or unbalanced mode. See Analogue inputs.

 

Mic/Line input Combos 1-4: for microphones, with 10dB to 65dB finely-adjustable gain, switchable -20dB pad and switchable phantom power.  See Analogue inputs.